Spend $1,000 Get a FREE Hoodie - Get Yours While Supplies Last  
  1. Motor Control / 
  2. Surge Protection/Suppressor / 
  3. Eaton / 
  4. SPD120240H1P

Eaton Surge Protection/Suppressor SPD120240H1P

IMAGES ARE FOR REFERENCE ONLY.

Select Product Condition:

View Specifications


SPD120240H1P Specifications

View Specifications

SPD120240H1P, motor control, surge protection/suppressor, Eaton, SPD, 120 kAIC, 240V high-leg delta (4W+G) on B phase, Basic feature package, NEMA 4X stainless steel enclosure, external side mount, 150 L-N, 150 L-G, 150 N-G, 300 L-L operating voltage

Manufacturer
Eaton
Subcategory
Surge Protection/Suppressor
Family
SPD Series
Surge Current
120kA
Voltage Rating
240
Enclosure
NEMA 4X stainless steel

Electrical.com is NOT an authorized distributor for Eaton and therefore the manufacturer’s warranty does not apply. This product does include an Electrical.com 2 year warranty.

Pearl Logo
Standard Warranty Logo
Ships WorldWide Logo
Rush Shipping Logo
SPD120240H1P Specifications:
Part NumberSPD120240H1P
Manufacturers
Weight4 lbs
Surge Current120kA
Voltage Rating240
EnclosureNEMA 4X stainless steel
The SPD120240H1P is a 120 kA per phase surge protective device from Eaton’s SPD series, for V high-leg delta (4-wire plus ground) systems. It is housed in a NEMA 4X stainless steel enclosure and mounts externally to electrical distribution equipment, so it can be installed outdoors or in wash-down and corrosive environments without opening the host equipment. It protects connected equipment against voltage surges and transients across all four protection modes: line-to-neutral, line-to-ground, line-to-line and neutral-to-ground. This device has the Basic feature package, with dual-colored LEDs for each phase and mode, plus dual-colored LEDs for neutral-to-ground protection. It is a Type 1 device that can also be used in Type 2 applications. The nominal discharge current is 20 kA and the short circuit current rating is 200 kA. It operates at 50/60 Hz from -40 to 50 °C and 5 to 95% humidity, non-condensing. It is UL 1449 5th Edition listed and comes with a 10-year warranty, extended to 15 years with online registration. The unit is prewired with a factory-installed conduit interface, so installation means mounting the unit, making the conduit runs and landing the wires on the host assembly. No internal wiring is needed. Surge protection at the service helps prevent damage to motors, drives, controls and electronics. Check the voltage system and feature package against your installation before ordering, and follow Eaton’s instructions for installation. Purchase the SPD120240H1P at Electrical.com, your reliable partner for industrial and commercial electrical products from leading brands such as Eaton, Siemens, Schneider Electric, ABB, Square D and many more.